Melt and Pour Instructions - Coconut Soy / EC-26 Wax

How to Use

• Prepare vessels first, or prepare while wax is heating up. ie wick vessels and secure with wick centering bars before pouring in hot wax.
• Cut wax into smaller chunks.  Coco Soy wax is a soft enough wax where you can use a butter knife to score it and break it into smaller pieces.
• Heat to 200 - 220°F degrees, remove from the heat source, add fragrance oil and dye, blend for 15-30 seconds and pour immediately.
• For consistently smooth results, it is recommended to pour hot at around 190°F.
• For thick glass and or cooler room temperatures below 65°F, pre-heating the glass is recommended.  For example, you can either place jars in the oven on the lowest setting, or use a heat gun to preheat jars.
• For smoother top surfaces (ie granite), it is recommended to heat lamp the surface after candle has set up or place candle on a raised cooling rack.
• The maximum fragrance load is 8-12%, but higher fragrance loads should be tested per fragrance.  Personally, I use 8-9% fragrance load.
• We recommend allowing a 1-2 week cure time to maximize the cold and hot throw.