Skip to content

Cart

Your cart is empty

Heating Instructions - Titan 5474 ParaSoy Wax

How to Use

  • Prepare vessels first, or prepare while wax is heating up. ie wick vessels and secure with wick centering bars before pouring in hot wax.
  • Cut wax into smaller chunks.  TitanWax is a soft enough wax where you can use a butter knife to score it and break it into smaller pieces.
  • Heat to 210°F degrees, remove from the heat source, add fragrance oil and stir for 15-30 seconds.  If you're adding dye, add dye and stir for an additional 15-30 seconds until fully blended.
  • For consistently smooth results, the manufacturer recommends pouring between 155 - 165°F.  However, I've had great results pouring around 190°F so feel free to experiment with this. 
  • For thick glass and or cooler room temperatures below 65°F, pre-heating the glass is recommended.  For example, you can either place jars in the oven on the lowest setting, or use a heat gun to preheat jars.
  • For smoother top surfaces (ie granite), it is recommended to heat lamp the surface after candle has set up or place candle on a raised cooling rack.
  • The maximum fragrance load is 10%, but higher fragrance loads should be tested per fragrance.  Personally, I use between 8-9% fragrance load.
  • We recommend allowing a 1-2 week cure time to maximize the cold and hot throw.

Safety Data Sheet

    HH Candle Community Hive

    Join the 7200+ members in our exclusive group to get access to promos, product announcements, educational content, and more!

    Join Us! It's Free!