Soy Coconut Luxury Wax | Coco Soy 51104 (Titan)

•Prepare vessels first, or prepare while wax is heating up. ie wick vessels and secure with wick centering bars before pouring in hot wax.

•Cut wax into smaller chunks.  Coco Soy 51104 is soft enough where you can use a butter knife to score it or pry into it, and break it into smaller chunks.

•Heat between 200-210°F degrees, remove from the heat source, add fragrance oil and stir for 15-30 seconds.  If you're adding dye, add dye and stir for an additional 15-30 seconds until fully blended.

•For consistently smooth results, the manufacturer recommends pouring hot at approximately 180°F. 

•For thick glass and or cooler room temperatures below 65-70°F, pre-heating the glass is recommended.  For example, you can either place jars in the oven on the lowest setting, or use a heat gun to preheat jars.

•The maximum fragrance load is 10%, but higher fragrance loads should be tested per fragrance.  Personally, I use between 8-9% fragrance load.

•I recommend allowing a 1-2 week cure time (ideally 2 weeks) for proper wicking and to maximize the cold and hot throw.

General Wick Guide

WICKING TIP:  Coconut blended waxes are different than regular soy wax. There won't be a full melt pool until you get about half way down the jar. 100% soy has a "memory" and will tunnel, however, coconut blended waxes don't as much.  Initially, there will be some "hang up" on the sides of the jar but as the wick burns, the sides of the jar heat up, and melt the rest of the wax. The important thing to keep an eye on when wick testing is to make sure the jar doesn't get too hot to the touch, there's no soot starting to form along the rim of the vessel, and ideally, the temperature of the melt pool should be between 140 - 160 F.

How do you calculate the amount of fragrance oil to use?

First, you need to know what percentage of fragrance oil you want to use. The average usage is 6%.

Here is a basic formula:

(oz of wax using) x (% of fragrance oil you want to use) = (oz of fragrance oil needed)

For example, let's say you are using two pounds of wax and want to use 6% fragrance oil.

First, you'll need to calculate the number of ounces of wax you have:

2 x 16 (number of oz in 1 pound) = 32oz

Plug these numbers into your formula:

32 x 6% = 1.92oz

You can round up to 2oz for easy measuring on your scale.

Below, I created an easy fragrance load calculator where it will calculate the amount of fragrance oil needed in both ounces and grams.